Mvci Driver For Toyota-cable 2.0.1 15

How to Install MVCI Driver for Toyota-Cable 2.0.1 on Windows 10 64bit

If you have a Mini VCI J2534 cable and want to use it with Toyota Techstream software on Windows 10 64bit system, you may encounter some problems with the driver installation. In this article, we will show you how to install MVCI driver for Toyota-Cable 2.0.1 on Windows 10 64bit step by step.

Step 1: Download and extract the driver files

You can download the driver files from this link: Win64 MVCI Driver for TOYOTA TIS. This file contains the necessary Mini-VCI 64 bit files for Windows 10 64bit system. You can also use the driver files from your Mini-VCI CD if they match the contents of the linked file.

After downloading, extract the file to a folder on your computer. You should see the following contents:

ftdibus folder

ftdiport folder

FirmwareUpdateTool.exe

MVCI32.dll

MVCI Driver for TOYOTA.msi

Readme.txt

Step 2: Create some new folders and copy some files

Create some new folders under your C:\Program Files (x86) folder as follows:

C:\Program Files (x86)\XHorse Electronics

C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS

Copy the files FirmwareUpdateTool.exe and MVCI32.dll from the extracted folder to the C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS folder. It should look like this:

This is one of the key steps to getting this working. If these files are not in this folder, then Techstream won't work with 64bit Windows and the Mini VCI cable.

Step 3: Install the driver from MSI file

Run the MVCI Driver for TOYOTA.msi file from the extracted folder and follow the installation wizard. Accept the license agreement, enter your user name and company name, and press Install. Wait until the installation is finished and press Finish.

Step 4: Install the driver manually from INF files

Some users have reported that the drivers installed by the MSI file don't always work, so it is recommended to install them manually from the INF files.

To do this, go to the ftdibus folder and right click on the ftdibus.inf file and click Install. Accept any warnings that appear. Then go to the ftdiport folder and right click on the ftdiport.inf file and click Install. Again accept any warnings that appear.

Step 5: Plug in your Mini-VCI cable and install device driver

Plug in your Mini-VCI cable to your computer's USB port and wait for Windows to recognize it and load the drivers. You can check if the drivers are loaded correctly by going to Device Manager and looking for XHorse Electronics devices under Ports (COM & LPT) and Universal Serial Bus controllers.

You can also open MVCI Firmware Update Tool from Start menu or desktop shortcut and check the device information. The firmware version should be 1.4.1 or higher.

Step 6: Run Techstream and select VIM

Run Techstream software from Start menu or desktop shortcut. If it prompts you for Java Runtime message, press No to continue. If it asks you to enter activation 061ffe29dd