Dolby Digital Live Pack - Sb Audigy Series Crack [2021]
Click Here --->>> https://cinurl.com/2tzLJx
How to Enable Dolby Digital Live for Sound Blaster Audigy Series
Dolby Digital Live is a feature that allows you to enjoy 5.1 surround sound from any source on your PC. It encodes the audio signal into a Dolby Digital bitstream and sends it to your home theater system via a single S/PDIF cable. This way, you can experience immersive sound from games, movies, music, and more.
However, not all sound cards support Dolby Digital Live by default. If you have a Sound Blaster Audigy series card, you may need to purchase and activate the Dolby Digital Live Pack from Creative's website[^2^]. This pack is a software update that enables Dolby Digital Live for Sound Blaster Audigy series cards.
In this article, we will show you how to install and use the Dolby Digital Live Pack for Sound Blaster Audigy series cards.
Step 1: Check your sound card model and driver version
Before you purchase the Dolby Digital Live Pack, you need to make sure that your sound card is compatible with it. The pack works with the following models:
Sound Blaster Audigy 2
Sound Blaster Audigy 2 ZS
Sound Blaster Audigy 4
Sound Blaster Audigy 4 Pro
Sound Blaster Audigy 5/RX
You also need to have the latest driver for your sound card installed. You can download it from Creative's website[^1^]. The driver version should be 3.01.0046 or higher.
Step 2: Purchase and activate the Dolby Digital Live Pack
Once you have confirmed that your sound card and driver are compatible, you can purchase the Dolby Digital Live Pack from Creative's website[^2^]. The pack costs $4.72 and requires an online activation.
After you complete the payment, you will receive an email with a download link and an activation code. Download the pack and run the installer. Follow the instructions on the screen and enter your activation code when prompted.
The installation process may take a few minutes and require a reboot. After that, you should see a new icon in your system tray called \"Dolby Digital Live\". This means that the pack has been successfully installed and activated.
Step 3: Enable Dolby Digital Live in Audio Console
To use Dolby Digital Live, you need to enable it in Audio Console. This is a utility that allows you to configure various settings for your sound card.
To launch Audio Console, click on the \"Dolby Digital Live\" icon in your system tray and select \"Audio Console\". Alternatively, you can find it in Start Menu > All Programs > Creative > Sound Blaster Audigy > Audio Console.
In Audio Console, go to \"Encoder\" tab and check the box next to \"Enable Dolby Digital Live\". You can also adjust the encoder quality and volume settings according to your preference.
Note that when you enable Dolby Digital Live, your sound card will output only one digital stream via S/PDIF. This means that you will not be able to use other features such as CMSS-3D or EAX while using Dolby Digital Live.
Step 4: Connect your sound card to your home theater system
The final step is to connect your sound card to your home theater system using a single S/PDIF cable. Make sure that your home theater system supports Dolby Digital decoding and has an S/PDIF input.
Plug one end of the S/PDIF cable into the digital output of your sound card (usually marked as \"Digital Out\" or \"Optical Out\") and the other end into the digital input of your home theater system (usually marked as \"Digital In\" or \"Optical In\").
Turn on your home theater system and select the appropriate input source. You should see a Dolby Digital logo on your home theater system's display indicating that it is receiving a Dolby Digital signal from your PC.
Enjoy 061ffe29dd