Golden Future Laser Bore Sight Collimator Manual WORK
LINK ::: https://urlca.com/2tBi2L
How to Use the Golden Future Laser Bore Sight Collimator
A laser bore sight collimator is a device that helps you align your firearm's sights or scope with the bore of the barrel. It can save you time, money, and ammunition when sighting in your optics. One of the models available on the market is the Golden Future Laser Bore Sight Collimator, which comes with different adapters for various calibers. Here is a guide on how to use it effectively.
Install the batteries in the laser bore sight collimator according to the instruction manual[^1^]. Make sure the switch is off before inserting the batteries.
Select the adapter that fits your firearm's caliber. The adapters are labeled with numbers that correspond to different calibers. For example, number 1 is for .177 caliber, number 2 is for .22 caliber, and so on. You can find the full list of calibers and numbers in the instruction manual[^1^]. If none of the adapters fit your bore perfectly, you can use some tape or paper to make them snug.
Insert the adapter into the bore sight collimator and tighten it with the included hex wrench. Make sure it is secure and aligned with the laser.
Insert the bore sight collimator into the muzzle of your firearm and turn on the switch. You should see a red dot projected on a target or a wall. The distance between the target and your firearm depends on your preference and the range you plan to shoot at. A common distance is 25 yards.
Adjust your sights or scope until they point at the same spot as the laser dot. You may need to use a rest or a bipod to keep your firearm steady while adjusting. You can also use a chart (inside front cover) to sight in your firearm at shorter distances[^1^].
Turn off the switch and remove the bore sight collimator from your firearm. You can now test fire your firearm at the range and fine-tune your sights or scope as needed.
The Golden Future Laser Bore Sight Collimator is a handy tool that can help you improve your accuracy and save resources. However, it is not a substitute for actual shooting practice. You should always follow the safety rules and precautions when handling firearms and lasers. For more information, please refer to the instruction manual[^1^] or watch this video[^2^].Benefits of Using a Laser Bore Sight Collimator
Using a laser bore sight collimator has several advantages over other methods of sighting in your firearm. Here are some of the benefits you can enjoy:
It is easy and convenient. You don't need to fire any shots or go to the range to use a laser bore sight collimator. You can do it at home or anywhere with a safe and legal target. You also don't need any tools or equipment other than the bore sight collimator and your firearm.
It is accurate and reliable. A laser bore sight collimator projects a straight beam of light that shows you exactly where your bore is pointing. It eliminates the human error and parallax that can affect your sight alignment. It also works with any type of sights or scopes, whether they are iron, red dot, holographic, or magnified.
It is economical and efficient. A laser bore sight collimator can save you a lot of money and time by reducing the number of shots you need to fire to zero in your sights or scope. It can also save you ammunition, which can be scarce or expensive depending on the caliber and availability. It can also extend the life of your barrel by minimizing the wear and tear caused by frequent shooting.
Drawbacks of Using a Laser Bore Sight Collimator
While a laser bore sight collimator has many benefits, it also has some limitations and drawbacks that you should be aware of. Here are some of the challenges you may face when using a laser bore sight collimator:
It is not a guarantee of accuracy. A laser bore sight collimator only shows you where your bore is pointing, not where your bullet will hit. There are many factors that can affect your bullet trajectory, such as wind, gravity, bullet drop, barrel harmonics, and atmospheric conditions. You still need to test fire your firearm at the range and make adjustments based on your actual results.
It is not compatible with all firearms. A laser bore sight collimator requires a clear and unobstructed path from the muzzle to the target. Some firearms may have features that interfere with this path, such as flash hiders, muzzle brakes, suppressors, bayonets, or front sights. You may need to remove these features or use a different type of bore sighter for these firearms.
It is not safe to use without proper precautions. A laser bore sight collimator emits a powerful beam of light that can cause eye damage or blindness if viewed directly or reflected off a shiny surface. You should always wear eye protection and avoid looking at the laser dot or pointing it at yourself or others. You should also treat your firearm as if it were loaded and follow the basic safety rules when using a laser bore sight collimator. 061ffe29dd